Electronics2day.com

BEACON Electronics Presents

TV Service Codes

SONY / LG / SAMSUNG / VIDEOCON / SANSUI / PHILIPS / TCL

SONY Colour Television Receiver

Models:G-Series,J-Series,KV-G21M1,KV-G14F2RS,KV-2197M3(RM-870),KV-G14M1,KV-G14MD1,KV-G14P1,KV-G14P1,KV-G14P11,KV-G14Q1,KV-G14S1(RM-870),KV-J21MF1,KV-J21MH1,KV-J21MN11(RM-870),KV-2168MT,KV-2169MNT(RM-870),KV-XF29M35,KV-XF29M63,KV-XF29M93,KV-XF25M21,KV-XF25M63,KV-XF25M93 (RM-945).KV-XA21M80,KV-XA21M83.KV-XA21M50,KV-XA21M61,KV-XA21M60(RM-952),KV-XF25M81,KV-XF25M80(RM954),KV-F29MF1,KV-F29MH11,KV-F29MH31,KV-F29MN11,KV-F29MN31(RM-857),(RM-858)

For entering into service mode:

· Press the remote control key in the following sequence

              STANDBYšDISPLAYš5šVOL+šPOWER

· To raise/lower service item no: press numeric buttons “1” or “4”

· To raise/lower data value: press: “ MUTING” Button on handset

· To execute writing in memory; press “0” on handset

· To cancel service mode ; turn the TV into standby by pressing “POWER” button on the handset, and then again switch on the TV by pressing the same button                    

Chassis:AE2,AE-2B,AP-2

Models: KV-E5231,KV-E2931,KV-E3431,KV-E2551A/B/E/K,KV-S29JN1/MN1/SN1,KV-S34/JN1/MN1/SN1/,KV-B2911,KR-S4613

For entering into Service Mode:

· Turn on the main power switch of the set while pressing any two buttons on the front panel. “TT” will appear on the upper right corner of the screen. Press the “MENU” button on the remote control handset. In menu select “DEMO” and press “OK” Select DEVICE corresponding to the adjustment you need.

· To store; “OK”

· To exit: turn off the set.

Chassis: AE-2

Models: KV-B2911/A/D/B/K,KV-B2913E

For entering service mode:

· Turn on the main power switch of the set while pressing any two buttons on the front panel. “VOL” will appear on the upper right corner on the screen. Press the “MENU” button on the remote control handset.

Chassis:BE-4

Models:KV-2170,KV-2180,KV-2540

For entering into service mode:

· Press remote control keys in the following sequence

· ?š5šVOL+šTVšMENU

· To exit: 00

Chassis:VE-3V,BE-3B

Models:KV-C2171K,KV-C2171K,KV-C2171KR,KV-X2501K,KV-X2581K,KV-X2581KR,KV-M2540K,KV-M2541K,KV-X2901K,KV-X2981K,KV-X2981KR,KV-M1440,KV-M2170,KV-M2171,KV-M2181,KV-M2101,KV-24WS1A/B/D/E/K/RU(RM-837)

Processor:CXP85340A-116Q/117Q

For entering into Service Mode:

· Press the remote control keys in the following sequence

            DISPLAY ON SCREENš5šVOL+šTV

· “TT” will appear at upper top corner.

Chassis:G1

Models: KV-S29RN1,KV-S34RN1

For entering into Service Mode:

· Set the TV in on duty mode. Press from the board following button sequence

            DISPLAYš5šVOL+šPOWER

Chassis:AE-2F

Models: KV-S2941A/B/D/K,KV-2943E (RM-831)

For entering into service mode:

· Twice press button “VKL” on board. In a right top corner “TT” will appear then press button “MENU”

Chassis: BE-3D,BE-4

Models:KV-24WS1A/B/D/E/K/R/U (RM-862)

Processor:MSP3410B-PS-F7-T,MSP3410C-PS-C6-T

KV-2181KR,KV-M2540,KV-29X1A/B/D/E/K/L/R/U

For entering into Service Mode:

· Set the TV in on duty mode. Press from the board following button sequence

            ON SCREEN DISPLAYš5šVOL+šTV

LG Colour Television Receiver

Models:SAMPOORNA,RF-14A80K ADKBBIN,RF-14/20/21CA30K,RF-14/20/21CA30KE, RF-20/21CB30F,RF-20/21CB30VE,RF-21FA20KE,CF-14D79K,CF14D79KE,CF20/21D79K,CF20/21F69K,CF-20/21S12KE,CF-20/21D331KE,CF-20/21S42KS

All Latest Models

For entering service mode:

· Simultaneously press “OK” button on remote handset and on the front panel of television receiver for 6 to 8 seconds.

· Controls: YELLOW button (Q-VIEW button)

· Accessing parameters: Program Up/Dn buttons

· Changing data value: Volume Up/Dn buttons

· To exit: Switch of the set

SAMSUNG Colour Television Receiver

Models: CB-14EV,CB-14E5,CB-20E5,CB-20F4

All Latest Models

For entering into service Mode:

· Press the remote control keys in the following sequence

            POWERšDISPLAYšMENUšMUTEšPOWER

· Controls : CH/P Up/Dn keys

· Changing data value: Volume +/- keys

· To exit Switch off the set.

VIDEOCON Challenger Dlx Colour Television Receiver

Models:3634R,5134R,5443-R

For entering into Service Mode:

· Short contacts of the hidden SERVICE key inside the remote handset.

· After getting the screen of “SERVICES” press desired numeric key (“0”, “1”, “2”, “3”, “4”, “5”, “6”) to go into that menu.

· To enter into Service Mode, press numeric button “1”

· To enter into Design Mode, press numeric button “2”

· To enter Factory Shipping Mode, Press numeric button “3”

· To enter into Manufacturing Mode press numeric button “4”

· To access any parameter, use Up/Dn Keys of Program /Channel

· To change value of any parameter, use +/- keys of volume

· To exit, again short contacts of hidden Service Key or switch off the set into standby

SANSUI/VIDEOCON Colour Television Receiver

Models: SV-2012,SV-1412/5136-R

For entering into Service Mode:

· Short contacts of the hidden SERVICE key Inside the remote handset

             “TEST” will appear on the screen.

· Now, Press numeric keys ( “1”, “2”, “3”, “4”, “5”, “6”, “7”, “8”, “9” & “0” ) on the remote handset to get the various service menus.

· Note that menu no. 3,4 & 5 are general menus while menu no.1,2,6,7,8,9 & 0 are special menus. To access these menu enter special code “991220” when “TEST” appears on the screen.

· To access any parameter , use Up/Dn keys of Program/Channel

· To change value of any Parameter, use +/- keys of Volume

· To exit , again short contacts of hidden Service key or switch off the set into Standby

PHILIPS UOC Kit

 For entering into Service Mode:

· First Press ‘MENU’ button and numeric  key “1147”on the remote handset to get the various service menus.

· To access any parameter , use Up/Dn keys of Program/Channel

· To change value of any Parameter, use +/- keys of Volume

TCL Colour Television Receiver

Model:T2111A

· Simultaneously press “DISPLAY” button on remote handset and Volume- button on the front panel of television receiver for 6 to 8 seconds  to get the various service menus.

· To access any parameter , use Up/Dn keys of Program/Channel

· To change value of any Parameter, use +/- keys of Volume

· To exit POWER switch off the set